Energy saving has a value ranging from zero to Acotel!

The Energy Management service provides companies with advanced tools for monitoring, analyzing and managing energy consumption (electricity, water, gas, thermal energy) and is aimed at all organizations that need to initiate a continuous process of controlling and reducing energy consumption and related costs.

Specifically, the solution allows consumption data to be collected from the fiscal meter, monitored and analyzed in order to know consumption, control energy expenditure and implement energy optimization actions. The Acotel Energy Management solution is based on Cloud Azure® and through specific field devices, equipped with mobile connectivity (2G/4G), allows near-real-time monitoring of energy consumption.

FEATURES

Measurement and Verification

Generate guaranteed savings through continuous near-real-time monitoring. Identify and monitor operational best practices to replicate them in all areas of your business

Quantifies the savings

Verifies that economic savings are as estimated. Checks that performance and savings are consistent over time and identifies new forms of improvement

Strategic Control

Compare consumption of similar locations with each other from a single interface. Define new rules to achieve behavioral changes and better energy-saving habits

Budgeting - Targeting

Determines savings targets and verifies budgets through complete plant visibility. Supports thoughtful decisions on future energy purchases through peak and off-peak analysis

Anomalies and Alarms

Set rules for discovering faulty equipment, energy waste or abnormal consumption that are often underestimated but once identified and resolved allow significant savings to be generated

Quick installation

Industry Meter and Smart-Mem devices can be installed quickly and easily even by unskilled personnel

INSTALLATION IN 5 MINUTES

Energy products are designed to be safe and easy to install and use without the need for specialized personnel. It only takes 5 minutes and a few steps to connect your meter anywhere on the Internet and get your electricity consumption under control.

Step 1

Remove the protective film from the sensors and apply them to the two meter LEDs, RA (1) and RR (2). Then connect the other end of the cable to the ACO220 device.

Step 2

Press the power button using the pin. The Acotel logo will start flashing, and when finished, the device will be operational

Step 3

Hook the Toroid (provided) around one of the electrical wires coming out of the meter. In this way, the device will be powered

Step 4

Make a note of the current consumption value as reported on your electricity meter; they will be helpful in completing the device configuration

PRODUCTS

The Aco 200 series acquires the value ofactive energy from a meter placed on an electrical system of less than 16.5 kW, with quarter-hourly values, by means of the optical sensor (photodiode) applied to the meter LED, also infrared.

The device has a built-in GSM/2G or LTE mobile connection, depending on the model chosen, for data transmission to the Acotel platform. Data is sent at specific intervals depending on the model. The built-in wireless data connection and internal rechargeable battery enable Plug & Play installation.

The Aco 200 can send real-time notifications in case of power failure and low battery level.

The Aco 220 series acquires the value ofactive and reactive energy from a meter placed on an electrical system greater than 16.5 kW, with quarter-hourly values, by means of the optical sensor (photodiode) applied to the meter led, also infrared.

The device has a built-in GSM/2G or LTE mobile connection, depending on the model chosen, for data transmission to the Acotel platform. Data is sent at specific intervals depending on the model. The built-in wireless data connection and internal rechargeable battery enable Plug & Play installation.

The Aco 220 can send real-time notifications in case of power failure and low battery level.

CONTACT US

10 + 6 =